Fans
Showing all 17 results
-
KSh 40,439.20
- USD: 312.90$
Potentiometer with ignition
Manual speed control with potentiometer and ignition system with 0-1-2 wall mounted selector by turning the switch / shaft of the potentiometer, we change the amount of resistance on either side of the wiper which is connected to the center pin of the potentiometer. This changes or reduces electric current to dim light or speed of any equipment like the speed of the electrical engines.
Electric Potentiometer
KSh 40,439.20Select options This product has multiple variants. The options may be chosen on the product page- USD: 312.90$
Quick View -
KSh 465,264.02
- USD: 3,600.00$
Extractor fans
Extractor fans or exhaust fans are not only good at removing steam and odors, but they can also get rid of unwanted heat. This works best when you leave all of the doors in the house open to try and remove hot air from by creating negative pressure in.
Extractor fan
KSh 465,264.02Select options This product has multiple variants. The options may be chosen on the product page- USD: 3,600.00$
Quick View -
KSh 483,370.54 – KSh 664,939.83
- USD: 3,740.10$ - 5,145.00$
Industrial HVLS Ceiling Fans
HVLS (High Volume Low Speed) industrial fans with gear motor, without oil but grease to lubricate. HVLS fans efficiently cool expansive areas such as warehouses and distribution centers by moving large air volumes at low speeds, optimizing airflow in open spaces.
A single Industrial HVLS ceiling fan can replace dozens of simple portable fans, using only a small percentage of the electricity consumed by them.
Industrial Ceiling Fans
KSh 483,370.54 – KSh 664,939.83Select options This product has multiple variants. The options may be chosen on the product page- USD: 3,740.10$ - 5,145.00$
Quick View -
KSh 362,324.36 – KSh 515,667.62
- USD: 2,803.50$ - 3,990.00$
Industrial tiltable Fans 400V 3ph
Benefits of ventilation to low height buildings where horizontal fans can’t be installed. Its special shape makes it flexible, allowing it to work horizontally or to be tilted as required, from 0° to 90°: the aim is to optimize the airflow even in the most complex situations. Blow air high m3 volume air directly to the floor that increases the amount of air as unit. That collects the moisture in the environment which affects cool feeling and circulates air in the environment. The gearless and have energy-efficient (permanent magnet) brushless motor silent and no maintenance need.
Industrial Tiltable Fans
KSh 362,324.36 – KSh 515,667.62Select options This product has multiple variants. The options may be chosen on the product page- USD: 2,803.50$ - 3,990.00$
Quick View -
KSh 559,092.26 – KSh 1,085,616.05
- USD: 4,326.00$ - 8,400.00$
Industrial Ventilation Fans
Solutions and use for ventilation of large industrial and civil structures sport facilities and public spaces and halls. These HVLS fans series gearless and have energy-efficient (permanent magnet) brushless motor which deploys an on-board mechanism for automatic and independent speed control. This innovation eliminates the gear motor located in traditional asynchronous motors, thus reducing the presence of mechanical parts subject to wear. All this results in lower maintenance requirements, greater efficiency and lower consumption.
Industrial Ventilation Fans
KSh 559,092.26 – KSh 1,085,616.05Select options This product has multiple variants. The options may be chosen on the product page- USD: 4,326.00$ - 8,400.00$
Quick View -
KSh 1,421,640.06 – KSh 1,680,120.07
- USD: 11,000.00$ - 13,000.00$
Portable Industrial HVLS Fans
Portable HVLS Fan is designed to be easily moved, generates powerful airflow to enhance better ventilation. Saves energy, but also generates powerful airflow with quiet sound.
Portable Industrial Fans
KSh 1,421,640.06 – KSh 1,680,120.07Select options This product has multiple variants. The options may be chosen on the product page- USD: 11,000.00$ - 13,000.00$
Quick View -
KSh 271.40 – KSh 407.11
- USD: 2.10$ - 3.15$
Steel Cable Ropes 5 mm
It is suitable for nearly any application with their special composition and compliance with EN 12385-4 standards, these ropes are a reliable choice in the industry. Technical Specifications Construction: This rope contains 6 layers of galvanized steel braid 6 x 7 and represents this structure provides safety.
Stainless Steel Cable
KSh 271.40 – KSh 407.11Select options This product has multiple variants. The options may be chosen on the product page- USD: 2.10$ - 3.15$
Quick View -
KSh 651.37 – KSh 3,392.55
- USD: 5.04$ - 26.25$
Tension Strainer Turnbuckle
Wire Robe & Cable Tension Strainers are Galvanized Turnbuckle eye-hook M4-6-8-10 hook at one end, close ring at the other end. Galvanized Turnbuckles are DIN 1480 standards. It is used to connect and stretch for steel ropes.
Wire Robe Tension Strainer
KSh 651.37 – KSh 3,392.55Select options This product has multiple variants. The options may be chosen on the product page- USD: 5.04$ - 26.25$
Quick View -
KSh 276.57 – KSh 475.60
- USD: 2.14$ - 3.68$
Wire rope clamps
Stainless Steel U-bolt Wire Cable Clamps are Perfect for Rigging Rope, Wire and Cable in Unlimited Applications Mainly in Rigging, Temporary Guardrail Systems, Securing Loads, and Basically Anything that Involves Cables. Clamps or Clips Are Clamped on Ensuring the End of the Cable Does Not Slip Out. Wire rope clamps are an alternative to swage sleeves and an economical way to make cable assemblies in the field. It is suitable for nearly any application
Wire rope clamp
KSh 276.57 – KSh 475.60Select options This product has multiple variants. The options may be chosen on the product page- USD: 2.14$ - 3.68$
Quick View