Description
Animal Cooling System for Milking Parlor and Deck
Cow Cooling System: Fans increase the rate of heat sharing by constantly changing the air near hot systems and increasing molecular collision. By evaporating moisture on animals, it reduces heat stress and increases comfort. Cow cooling systems are used in barn stalls and milking house parlors.
It is necessary to cool the animal while waiting for milking
The fan is a good evaporator. You can observe this by experimenting. Wet two different paper napkins at the same rate and place one in a normal environment and the other in front of the fan. The one against the fan will dry faster. Just like the clothes dry faster when there is wind. Human skin is quite moist, and the humidity will increase in hot weather. The fan helps this moisture evaporate, allowing your body to cool down more quickly.
Animal Cooling System:
Actually, the reason we gave last is dangerous for people. With this method, very rapid heat loss is experienced and can cause pain in the muscles. It can also cause sinusitis with its application in the head area. For this reason, it is recommended to be careful when using the fan.
The milking parlor ventilator is much more economical in terms of cost, implementation and maintenance compared to existing cooling systems, and is the ideal solution for combating heat stress in animals.
Milking Parlor Animal Cooling System Complete
Linear suspended water sprinkler line: 1 “1/4” stainless steel pipe, every 2.1 m and 360° spray nozzle solenoid valve, filter, drain excluding intermediate and gaps and outlets. CEDO Remote control panel. Run timer for ventilation management and reduces fan speed during soaking.
Low pressure DEC system used in parlor waiting areas. Working Pressure Range: 20-50 PSI (1.4 – 3.5 bar)
- 1 “1/4” – 40 mm stainless steel INOX pipe,
- Nozzles spraying every 2.1m and 170°
- solenoid valve,
- Filter, excluding drain,
- Interconnects gaps and outlets.
- CEDO Remote control panel.
- Run timer for ventilation management and reduces fan speed during soaking.
Low-pressure DEC system used in milking areas ( the area where the stress of milking cows is the highest) Working Pressure Range: 20-50 PSI (1.4 – 3.5 bar)
suspended water sprinkler line
- 1 “1/4”- 40 mm stainless steel INOX pipe,
- Nozzles spraying 360° every 2.1m
- Solenoid valve and fittings
- Filter, excluding drain,
- Interconnections, plug gaps and outlets.
- CEDO Remote control panel. Run timer for ventilation management and reduces fan speed during soaking.
Animal Cooling Systems Complete set
Cooling system and additional accessories:
solenoid valve
Thanks to the special valve, it cuts the water flow when the system stops (no dripping or leakage). The solenoid valve acts as a magnet when electric current is supplied and opens or closes the water passage.
B -Stainless INOX pipe
Long life, long life against rusting and calcification.
Sufficient water supply with 40 mm diameter.
E-Nozzle 360 °
Easy assembly – disassembly with socket pendant clamp connection
Angular impact type nozzle made of Stainless Brass material
Mechanical; The spring does not contain a valve, so there can be no corrosion, clogging and deterioration.
It is highly efficient and economical while providing sufficient spray water.
Low Operating Pressure Range: 20-50 PSI (1.4 – 3.5 bar)
G- Heart, sleeve and pipe connections
Leak-proof and fast assembly and intervention with high-quality polyethylene fasteners and plug, which can be made with special sealed easy and flexible connection.
C- DF Connection hangers
40-42 mm suspension connections made of galvanized material
System features and prices
CETHI05Z1U1ZS1 1 piece = 1,942.00 €
THI thermo-hygromic control unit 400V in galvanized sheet for imp ventilation and shower control for max 5 zones; Complete with remote panel, temperature and humidity probe, anemometer and relative mounts.
Provision of 400V THI thermo-hygromic control unit with galvanized sheet for imp ventilation and shower control for maximum 5 zones; Remote panel, temperature and relative humidity probe with anemometer
RADOCCRA1000IN 200 meters x 40.00- €= 8.000-€
Provision of linear dorsal on rack for water aspersion by means of: 1 “1/4” imp INOX pipe, shower heads installed every 2.1 m at 170 ° with not returned valve, support brackets, excluding solenoid valve, filter, drainage and installation variants for shifts and obstacles.
1 “1/4” imp INOX pipe, providing linear dorsal to the rack except for shower heads, solenoid valve, filter, drain and mounting variants, which are mounted with a non-return valve every 170 meters at 170° for connections.
RAELVA00011400 4 x 60.00€ = 240-€
Provision of 1 “1/4 24 V solenoid valve complete with fittings, discharges and” impy “filter. Excluding pressure reducer and hydraulic connection.
Complete with 1″ 1/4 24V solenoid valve, fittings, discharges and “impy” filter. Except for pressure reducer and hydraulic connection.
Selection of Flexible Ventilator Fan for Barns
Flexible Barn Fan mounted on Brushless-Magnet inverter is suitable for flexible use in terms of cost, application and maintenance compared to existing ventilation systems. Cooling the environment with the air flow of the barn fan from the ceiling increases the productivity and comfort of the workers and animals. Energy consumption for heating and cooling is reduced. By circulating the hot air accumulated at the height, a homogeneous climate is obtained in the space. LINK for BARN FAN SELECTION
Reviews
There are no reviews yet.