Divider Fastener

KSh 747.78KSh 815.76

  • USD: 5.72$ - 6.24$

Cubicle Divider Bolt Fastener

Wedge Anchor fasteners Nut & Bolt sets for fixing materials stainless steel with plug for fastening cubicle dividers to on a concrete and mastic asphalt floors.

SKU: NUTBOLT Categories: ,

Description

Cubicle Divider Bolt Fastener

Wedge Anchor Nut & Bolt set as a cubicle divider fastener for fixing materials stainless steel Washer and screw with plug for fastening cubicle dividers to on a concrete and mastic asphalt floors. Set with screws, and plugs made of special stainless steel for mounting materials on a concrete and mastic asphalt floor. Wedge anchors typically have a ring which is pushed outwards by a bolt which is larger in diameter towards the bottom of the hole. Wedge anchors are usually more expensive, and provide higher working loads.

Anchor bolts are utilized to associate underlying and non-primary components to concrete. The association can be made by a wide range of segments: anchor screws (additionally named latches), steel plates, or stiffeners. Anchor bolts move various sorts of burdens: strain powers and shear powers. By definition, an anchor bolt is a rock-solid latch that is utilized to interface objects to concrete. Steel posts, for instance, are regularly mounted onto substantial surfaces utilizing anchor bolts. The anchor bolts are passed through the foundation of the shaft and into the substantial itself.

An anchor bolt is used to attach objects or structures to concrete. All consist of a threaded end, to which a nut and washer can be attached for the external load. They can also be used to firmly affix embed plates to a concrete foundation when used with a structural steel element. The simplest anchor bolt is a cast-in-place anchor.

Wedge anchor bolt as Divider Fastener

An anchor bolt is a type of fastener that is used to secure items or constructions to concrete. Anchor bolts come in a variety of designs, most of which are proprietary to the manufacturers. All have a threaded end to which a nut and washer for external load can be added.

Anchor bolts secure structural and non-structural components to concrete (also known as fasteners), steel plates, or stiffeners can all be used to make the connection. Anchor bolts transfer two forms of load: tension and shear forces.

An anchor bolt is a type of fastener which is used to attach objects or structures to concrete. There are various types of anchor bolts, consisting of designs that are mostly proprietary to the manufacturing companies. Many of them consist of threaded end, to which a nut and washer can be attached for the external load.

Sleeve anchors rely on tightening torque to cause the anchor to expand and hold in the concrete. The sleeve runs nearly the full embedded depth in the concrete. The bolt slowly increases in diameter towards the bottom of the hole.

Wedge anchors typically have a ring which is pushed outwards by a bolt which is larger in diameter towards the bottom of the hole. Wedge anchors are usually more expensive, and provide higher working loads.

How do you extract a wedge anchor bolt that is too shallow due to concrete debris?

Assuming that there was improper debris at the base of the hole drilled to accept the anchor bolt. Wedge anchor bolts are designed to expand when the bolt is turned, resulting in the wedges pushing against the sides of the hole drilled in the concrete to accept the bolt. The wedging action of the mechanism is reduced by extracting the bolt carefully so as not to strip the threads. When the bolt is removed it is possible either to vibrate the wedges with a hammer drill/driver, resulting in the wedges collapsing against each other, thus enabling their removal with wire or needle-nosed pliers, or the wedges can be tapped lightly at their top, so as not to mar the threads, in order to collapse the wedges and release them from the sides of the hole.

If neither method of extraction works, it may be necessary to use a concrete coring tool to break out the concrete around the wedges, thus leaving an oversized anchor hole which must then be filled with quickset or other suitable hi-strength concrete mix and the wedge anchor bolt (new) inserted.

Additional information

Weight 0.1 kg
SIZES

10, 12

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…